credits and licences
Nothing about the printed case was designed here. The shell, the trays, the latches, the seals and the stand are published designs by other people, used under Creative Commons terms that require attribution, forbid commercial use, and oblige anything derived from them to carry the same licence.
by PjotrStrog
The shell, the lids, the trays, the latch, the seals and the stand stems. This is the case. Everything on this site is built on it.
by iamdrew
A remix of the V2 shell adding a five tip holder, a one metre cable channel, a brass iron holder and heat-set threaded inserts.
by kriscovery
An independent design built around a power bank, with its own reel and stand. Not a remix of the same shell, so its parts are not interchangeable with the others.
by Atiesh
A reference model, not a printable part. Its own notes say it is for modelling purposes only. It stands in for the flux syringe that lives in the upper tray, scaled to the 5 cc the tray cradle actually takes.
CC BY-NC-SA 4.0 covers the three case designs: attribution, non commercial use only, and derivatives must be shared under the same licence. CC BY-NC 4.0 covers the flux syringe: attribution and non commercial use, with no share alike clause.
In practice that means you may print these for yourself and modify them freely, you may not sell them or prints of them, and anything you publish that is derived from the case carries CC BY-NC-SA 4.0 forward along with this credit chain.
Termiman and PjotrStrog turn up in all three lineages, so they are the names to credit first if you are shortening this.
The work added on top of those models, and the only part of this project we can speak for: